Adding a link

Link types and statistics

There are a few type of links you can decide to insert in your email. In the application, we offer the major three: URL, anchors and e-mails (mailto).

• URL: Create a link to a website, to open a file (ex.: PDF file) or to make a phone call. To use this link type, enter the web address leading to your website in the URL field. To link to a file that is not already hosted on the web, follow the instructions here. Learn how to trigger a phone on click, here.
   
• Link to anchor in the text: Create links toward different sections of your email. It's often used to build a table of contents.To add an anchor to your text, follow the procedure found in this link.
   
• E-mail (also known as mailto): Add a link to an e-mail address. To use this link type, you will need to fill in the different fields regarding the address your link will point to and if needed the subject of your e-mail. You could also add informations regarding the content of your e-mail. Pay attention to special caracters: they are not always supported!

Link statistics

While all of the types listed above are supported in e-mails, we can only track statistics on URL type of links. To know more about statistics, click here.

How to add a link on text

1. Click where you would like to add your text.
    
2. Write down the sentence or words on which you would like to put your link.
    
   Should you write a web address (URL) directly in the content of your email?
   Quite the opposite. You should actually try to avoid textually writing your complete web address (URL) in your text. Ex: https://mywebsite/myblog/12345677...Instead, use action words on which you'll add your links. Good call to action could be "Download the flyer", "Learn more" , "Read the article" etc.
   
   Why? On top of not being very aesthetically pleasing, a very long URL could cause some display issues in a few email softwares. Additionally, when textually writing your link down in your email, you indicate to your reader, along with their antispam filter where the linkk points to. When using our platform to send your emails, we however replace the links with unique links personnalized for each recipient. Your subscriber will therefore be directed to this unique link, then redirected to the link you chose, allowing us to gather click statistics. This action is barely perceptible, as it happens in a fraction of a second...but not for antispam filters. The antispam filters can detect that the link written textually and the link where your subscriber will first land (its unique link) are different and may identify your email as phishing, hence why it's recommended to integrate links as hyperlinks.If you must right down the complete URL in the content of your email, we suggest not to add an hyperlink on it. Most email software will add the link directly in the email. However, you won't have any statistics for this link.
3. Highlight the sentence or word on which you would like to add your link. 
    
4. Select the "Link" button in the toolbar (the little chain icon). The link properties window will open. 
   
   
5. Make sure that the link type chosen is set to "URL". If this is not the case, click on the word below "Link type" and choose URL in the drop down menu.
   
    
6. In the URL field, enter the web address then click OK. 
   
   
   
   
    
7. Always test your links before sending out your email! To learn the different ways to test your email, click here.

How to change hyperlink styles

• how to change link font and size
• how to change the link color
• how to remove the link underline

How to change link font and size

Depending on where they are, the font and the size of your links are the same as those chosen by default for your texts or titles. To change the default choices of these elements in your text block:

1. Make sure your text block is selected (to select it, click on it one time) and open its "Text properties" in the side panel at the right of your template. 
    
2. Then, change the font and size of the "Texts" or "Titles" depending wether your links are in a paragraph or title.
   
   

If you rather wish to select a font and size for your links that is different than your default choices, follow these steps:

1. Select your hyperlink text.
    
2. In the tools above the text block, change the font and/or the size in the drop-down list. You can also add formatting options such as bold.
   
   

How to change the link color

1. Make sure your text block is selected (to select it, click on it one time) and open its "Text properties" in the side panel at the right of your template.
    
2. In the "Links" section, click the square to pick a color or enter directly the hexadecimal code of the desired color.
   
   

How to remove the link underline

There is two ways to remove the link underline:

• Manually
• From the underline option in the Block properties

Here's how to remove the link underline manually: 

1. Double-click on the link you wish to edit. The link properties window will open.
    
2. Go in the "Advanced" tab.
    
3. In the "Style" field, enter this text:
   
   text-decoration:none;
   
   If there is already something written in the Style field, enter a space after the last semi-colon and copy-paste the text above there.
   
   
    
4. Click "OK" to save the changes.
    
5. Don't forget to test your link.

Here's how to remove link underline from the Underlined option in the Block properties

1. Click the block where your link is.
2. Go to Block properties > Text properties > Links.
3. Check "No" under the Underlined option.
   

How to add a link on an image

Learn how to add a link on an image if it is:

• in an image block
• in an image inserted in a text block or in an custom HTML template

If your image is in an image block:

1. Click on the image block in which you wish to add your link.
    
2. In the side panel at your right, go in the "Image properties" section.
   
   
    
3. Enter the web address in the "Link" field.
   
   
    
4. Don't forget to test your link! To learn the different ways to test your email, click here.

If your image is in a text block or if you have created your own HTML email:

1. Click on the image on which you would like to add your link in your text zone to select it.
    
2. Click on the "Link" button represented by the chain icon in your toolbar. The link properties window will open. 
   
   
    
3. Make sure that the link type chosen is set to "URL". If this is not the case, click on the word below "Link type" and choose URL in the drop-down menu.
   
4. In the URL field, enter the web address then click "OK".
   
    
5. Don't forget to test your links before your mailing! To learn the different ways to test your email, click here.

How to add a phone hyperlink

It is possible to add a link that will trigger an action to dial a phone number. Here's how to do it:

1. Follow the steps #1 to 5 here.
2. Change the link protocol to "Phone".
3. Enter your phone number in the URL field as shown in the example below:
   
   555-555-5555
4. 
   
    
5. Don't forget to test your links before your mailing! To learn the different ways to test your email, click here.

How to edit a link on a text or button

1. Double-click on the link or the button you wish to edit. The link properties window will open.
    
2. Make the desired changes. If you don't see the URL field, change the link type to URL.
    
3. Click "OK" to save your modifications.

How to delete a link

To delete a link, simply highlight the sentence, word or button on which your link has been associated, then select the button displaying the link icon with the small "x".

This will allow you to simply remove the link without erasing your sentence, word or button.

How to change the link target

The link target determines the way your link will open after being clicked. To change the link target: 

1. Double-click the link or button to edit. The link properties window will open.
    
2. Open the "Target" tab.
    
3. Click the field below "Target" to open a drop-down list of choices.
   
    
4. Select the option you want.
    
5. Click "OK" to save your changes.

See also :

• How to create a link to open a file
• How to add anchors to a template (table of contents)
• Creating a link to view a mailing on a browser
• How to use the template editor